Sensor Paper
Paper Shredder Trouble shooting / Maintenance Guide
Head Lubrication
All paper shredders should have their cutting heads lubricated with a recommended lubricant on a regular basis. As a rule the higher the security level the more important and the more frequent should lubrication be applied. Failure to lubricate on a regular basis will result in jamming, overheating of the cutting head and subsequent damage to the head, gears or motor. A good guide for security level 3/4 shredders is every time the waste bin is emptied. Higher security level machines should be lubricated more frequently, strip cut shredders occasionally but sometimes on older machines when the head is worn lubrication will result in the paper not feeding at all. In this eventuality do not lubricate and start to consider replacement.
Lubrication should be carried out according to the user manual. This can be by passing paper that has oil on the surface through the head, by pre oiled sheets or by oiling the head directly (this should be done sparingly) ensuring that something is under the head to catch any excess. ie plastic bag with shredded paper in.
Self Lubricating Shredders
Some shredders are self lubricating and will stop when the oil needs replenishing. Only the manufactures specified oil should be used for these machines. If after replacing the oil the shredder will not operate switch it off and on again at the main power input, if there is no switch disconnect from the main supply and reconnect.
Paper Jams
In the event of a paper jam reverse the cutting head to clear the jam. Most shredders have an individual reverse switch/button but some have rocker switches and the operator may not be aware that the switch can be rocked back to reverse the machine. The shredder may appear to jam but this could be caused by the door opening, the bin full function operating or the safety flap being opened. If a jam will not clear it is advisable to check these.
Most paper shredders have a sensing device in the feed area which can start or stop the machine. If this sensor becomes dusty the machine may run continuously or show a permanent jam, cleaning this sensor with a soft blower brush may cure the problem. Please switch of the machine before cleaning this sensor. Most paper jams and subsequent damage is caused by feeding too many sheets of paper through the head at one time. Keep well below the manufactures specification as this is a maximum figure usually specified for 70 gsm (most paper is 80gsm) Also bear in mind the age of the machine, an older machine will not perform as well as a new one due to wear and tear.
Dead Machine
If a machine appears dead first check the power lead and fuses. Do not change the power lead for one with a lower rated fuse (This happens frequently) Secondly look for a hidden on/off switch. Some shredders have switches at the rear or side and can be inadvertently switched if say the machine is moved. Thirdly check that all doors lids are closed. Some machines switch off completely when the door is open.
Finally
Avoid putting any paper clips/staples through the head. Many paper shredders are able to take these but over a period of time these will cause more wear & tear to the head resulting in a shorter life Separate stapled sheets before feeding. Do not feed plastic through the heads, this stretches around the cutters eventually filling the gaps and slowing up the machine and can eventually stop the machine completely. Please read the operating instruction for individual machines.
I hope this guide has been of value. If you require further assistance please E Mail bob@shredder-service.co.uk or Telephone 07794717490
Bob Jaggs
About the Author
Bob Jaggs has been in the office equipment service industry since 1985 and is currently offering service for all makes of paper shredder in the Greater London area.The business name is B J Shredder service. He is willing to help with any questions on paper shredders.
bob@shredder-service.co.uk www.shredder-service.co.uk Tel 07794717490
The World’s first Sensor Perforated Paper Towel Dispenser
|
|
Intermec 1-206147-00 Pm4i – Label Stop Sensor . Includes Cables And Paper Guide $252.39 |
|
|
Lexmark 11A6237 Paper Select Sensor $29.99 |
|
|
Epson F346151000 Dfx5000 Paper Thickness Sensor $45.30 |
|
|
Lexmark 11A6240 4227 Paper Sensor $52.85 |
|
|
HP Paper Registration Sensor RY7-5009-000CN $50.00 |
|
|
NEW Simply Smart Towel-Matic Automatic Sensor Equipped Paper Towel Dispenser $69.99 |
|
|
Brother HL-5250 in PARTS – Rear Paper Sensor, HL-5240 $19.99 |
|
|
HP LaserJet 1000, 1200 Paper Pickup Sensor RG0-1072-000 $9.99 |
|
|
HP LaserJet 1000 1200 1300 Paper Output Sensor RG0-1082 $9.99 |
|
|
40X0046 Lexmark T640 Paper Size Sensor Board $37.95 |
|
|
Triton 9100/8100/9700 Low Paper Sensor & Feed Button $35.00 |
|
|
NEW i Touchless Automatic Touch-Free SENSOR Home Paper Towel DISPENSER/HOLDER $49.99 |
|
|
NEW HP P3005 Multipurpose Paper Tray Sensor, RM1-4041 $29.99 |
|
|
ICSensors 3145-002 Accelerometer With calibration paper $108.00 |
|
|
iTouchless TM001S Towel-Matic Sensor Paper Towel Dispenser Warranty NEW $74.47 |
|
|
iTouchless TM002S Towel-Matic II Sensor Paper Towel Dispenser Silver WarrantyNEW $89.99 |
|
|
iTouchless TM002W Towel-Matic II Sensor Paper Towel Dispenser White Warranty NEW $89.99 |
|
|
iTouchless TM002K Towel-Matic II Sensor Paper Towel Dispenser Red Warranty NEW $99.99 |
|
|
iTouchless Towel-Matic Automatic Sensor Paper Towel Dispenser $39.00 |
|
|
Towel-Matic II Sensor Paper Towel Dispenser – by Itouchless – TM002K $99.99 |
|
|
Towel-Matic II Sensor Paper Towel Dispenser – by Itouchless – TM002S $95.99 |
|
|
Towel-Matic II Sensor Paper Towel Dispenser – by Itouchless – TM002W $95.99 |
|
|
itouchless Towel-Matic Sensor Paper Towel Dispenser TM001S $56.99 |
|
|
1966 Kwik-Sensor Manual (White-Rodgers) 2nd ed $5.00 |
|
|
ENCAD PAPER SENSOR, Encad NovaJet Proe 500 thru 800 $7.80 |
|
|
Okidata ML320T Paper Out Guide Sensor Arm Arms Flag $7.99 |
|
|
Okidata ML590 ML591 Paper Out Sensor Flag Bail Arm 590 $8.99 |
|
|
HP Paper Sensor Flag RB2-5034-000CN $12.00 |
|
|
HP Paper sensor arm RB2-3010-000CN $12.00 |
|
|
Motion Activated Sensor Talking Toilet Paper Holder $11.90 |
|
|
Minolta MC2300W Printer Part – Paper Tray& Paper Sensor Switch w/ Flag $24.99 |
|
|
Canon RF 1000 Camera Paper Sensor PCB Assy $80.00 |
|
|
RB1-6001 HP ARM INPUT PAPER SENSOR LJ5MP – NEW $2.00 |
|
|
HP LaserJet 8000 Paper Size Sensor With Fingers RG5-1845 Fully Functional OEM $29.00 |
|
|
Encad NovaJet 1000i 1200i paper sensor carriage $25.99 |
|
|
Panasonic NN-SD681S, 1.2cuft, 1200 Watt Microwave with Inverter Technology and Blue Readout, Stainless Front $152.66 PANASONIC NN-SD681S 1.2 CUBIC-FT MICROWAVE… |
|
|
Clean Cut Touchless Paper Towel Dispenser $134.95 The CLEANCut is a touchless automatic paper towel dispenser. It uses state of the art LED sensors to dispense and cut paper towel to any length you choose. Simply break the beam on the right with your hand and towel instantly starts to dispense, as soon as you remove your hand from the beam, paper towel stops dispensing. Now that you have your desired length of towel, break the beam on the left an… |
|
|
iTouchless Towel-Matic II Sensor Paper Towel Dispenser … |
|
|
Kidde KN-COSM-B Battery-Operated Combination Carbon Monoxide and Smoke Alarm with Talking Alarm $64.97 The Kidde KN-COSM-B Battery-Operated Carbon Monoxide and Smoke Alarm combines two important safety devices into a single unit. This alarm includes a voice warning system that announces “Fire, Carbon Monoxide, Low Battery, or Smart Hush Activation.” The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of r… |
|
|
Cisco-Linksys Wireless-N Internet Home Monitoring Camera $129.99 Send live audio and video to a smartphone or web browser anywhere in the world! The Cisco-Linksys wireless-N internet home monitoring camera connects to your network wirelessly, and delivers a live audio/video stream to a smartphone or browser anywhere. Also captures video streams and sends email alerts with video clips upon motion detection…. |
|
|
Chamberlain 953EV Garage Remote $20.65 REPLACEMENT/EXTRA GARAGE SYSTEM REMOTEVERSATILE 3-BUTTON DESIGNSECURE CODED SIGNALLED NOTIFICATION LIGHT SIGNALS ACTIVATION & HELPS WITH PROGRAMMINGEASY PUSH-BUTTON PROGRAMMINGCOMPATIBLE WITH ANY CHAMBERLAIN(R) REMOTE WITH SAFETY SENSORS FROM 1993 TO PRESENTINCLUDES BATTERY & VEHICLE VISOR CLIPUPC : 787083109539Shipping Dimensions : 8.50in X 4.75in X 1.50inEstimated Shipping Weight : 0.3648… |
|
|
PEC-PAD Lint Free Wipes 4×4 100per/Pkg $7.90 PEC PADs are the ideal photo wipes for those who hate photowipes! Until PEC PADs came along, photowipes fell apart, left lint and scratched emulsions. PEC PADs are extremely strong, lint-free and so soft and pure it is almost impossible to scratch an emulsion with them. PEC PADs are so soft they can be safely used to clean all types of sensitive surfaces: scanners, CD’s, mirrors, lenses, telescope… |
|
|
Sanyo NEW 1500 eneloop 2-AA Ni-MH Pre-Charged Rechargeable Batteries with USB Charger $16.99 RECHARGEABLE UP TO 1500XUSB CHARGER IS DESIGNED FOR CHARGING 2 AA OR 2 AAA BATTERIESLOW SELF DISCHARGE BATTERIES MAINTAIN 75% CHARGE AFTER 3 YEARS OF NON-USE2000 MAH POWERNO MEMORY EFFECTUPC : 043712130085Shipping Dimensions : 0.74in X 3.99in X 6.88inEstimated Shipping Weight : 0.25… |
|
|
Sanyo NEW 1500 eneloop 2-AA Ni-MH Pre-Charged Rechargeable Batteries with C Spacer $9.99 2 BATTERY TYPES IN 1 KITPRE-CHARGED RECHARGEABLE BATTERIESREADY TO USE OUT OF PACKCAN BE RECHARGED 1500XHOLDS 75% OF CHARGE AFTER 3 YEARSNO MEMORY EFFECTSRECHARGES EMPTY OR PARTIALLY DRAINED BATTERIESENVIRONMENTALLY FRIENDLYUSER CAN INSERT TWO AA BATTERIES IN SPACER TO CREATE A C BATTERYUPC : 043712130252Shipping Dimensions : 1.08in X 3.84in X 7.13inEstimated Shipping Weight : 0.225… |
|
|
Brother TN360 High Yield Black Toner Cartridge $42.71 Brother TN-360 OEM Toner Cartridge (TN360) – 2,600 Pages… |